Al Aman Company is a specialized engineering and contracting firm focused on small to medium-sized energy facilities in the Middle East.
Our expertise covers conventional applications such as power, water, and HVAC, as well as emerging high-efficiency technologies like Combined Heat and Power (CHP), Tri-Generation, Solar, and integrated hybrid systems. These solutions deliver significant fuel savings and environmental benefits.
Enclosures
Steel Enclosure
Use
Portable housing that can contain a variety of power generation & MEP systems for multi-application uses.
Description
Design & fabrication of soundproof enclosures (canopies) to achieve the client’s sound level requirement (from 85 dBA – 70 dBA) for the following equipment:
- Generators (diesel fuel natural gas-heavy fuel biofuel)
- Air-cooled chillers
- Electrical and diesel generator pumps
- Medium & low voltage switchgears
With customized enclosure designs for special applications mainly being Data centers, SKADA and PLC, and other applications inc. music studios, power stations, central air conditioning rooms and air compressor rooms for hospitals. The sound level is measured after manufacturing using calibrated instrumentation, and can be measured without loads or with the actual loads on site.
Auxiliary Systems & Accessories
Exhaust Mufflers
Catalytic Converters
Use
Reducing exhaust noise level.
Description
Exhaust mufflers for industrial, residential, critical, super critical and hospital applications.
Use
Controlling emissions
Description
Connected to exhaust air to reduce carbon, unburnt fuel and NOx emissions.
Sand Trap Filters
Sound Attenuating Louvers
Sand Trap Louvers
Motorized Louvers
Fixed-type Louvers
Use
Trapping of very fine debris within airflow
Description
Fine mesh filters based on application, to prevent the passage of fine debris.
Use
Reducing noise created by direct airflow
Description
Louvers enhanced with soundproof material, used for fresh air intake or discharge to achieve the required noise level.
Use
Prevent sand and debris from passing
Description
Sand trap louvers made using aluminum, black metal or galvanized sheets, for trapping sand and larger debris.
Use
Open and shut airflows based on usage
Description
Motorized louvers for versatile operating conditions, useful for cases such as protection of idle/standby enclosures or a fire.
Use
Control amount & direction of airflow
Description
Fixed type louvers made using aluminum, black metal or galvanized sheets complete with bird screen.
Acoustic Doors
Acoustic Panels
Use
Reducing noise levels through doors
Description
Sound attenuated doors for industrial and commercial uses to achieve the required noise level.
Use
Reducing noise levels through walls & ceilings
Description
Soundproof panels for walls and ceilings to achieve the required noise level for enclosures, power plants, central air conditioning and air compressors plants.
Radiators
Use
Cooling generators to maintain std. operating temp.
Description
Remote radiators (vertical or horizontal) equipped with electrical motors with IP 65, outdoor type with low noise level for generator water cooling systems.
Enclosure Firefighting System
Use
Fire protection within confined spaces
Description
Firefighting systems in compliance with NFPA and civil defense requirements to fit our enclosure applications.
Tanks
Carbon Steel Tanks
Use
Store industrial fluids such as oil, fuel, water
Description
Carbon steel tanks that can be:
- Underground or overground
- Cylindrical or rectangular
- Single- or double-skin
- Vertical or horizontal
With a thickness as per design based on the capacity and operating pressure of the tanks. The tanks are equipped with all necessary nozzles and are normally painted by one layer of epoxy and two layers of final coat of painting with a thickness of 205 microns, to match the client’s requested RAL colors.
All designs cover tank accessories such as concrete foundation, dike walls, firefighting system, fuel filling pumps, fuel transfer pumps, fuel control pumps, flame arrestors, fuel flow meters, solenoid valves, heaters and thermostat to control the temperatures for heavy fuel, float switches etc.
Stainless Steel Tanks
Use
Store food materials such as grain, potable water etc.
Description
Design and fabrication of cylindrical stainless-steel tanks using 304 or 316 stainless steel depending on storage conditions, to store potable water, milk, grain etc.
The tanks are fitted with all necessary nozzles and are heavily treated to ensure longevity, in addition to receiving a smooth surface finish.
Switchgear & Electrical Panels
Mobile Hybrid Solar System
Use
A mobile power solution that combines sustainability and efficiency.
Description
Design & fabrication of hybrid solar energy system, which is a versatile solution tailored for diverse energy storage applications. Equipped with:
- Solar Modules.
- Robust hybrid inverter.
- Rack-mounted lithium-ion batteries.
- Diesel generator,
The system is seamlessly housed in an IP55-rated cabinet for enhanced protection against water and dust ensuring reliable performance in various environments. The Mobile Hybrid Solar System enclosure is a portable, containerized solar power system designed for easy transportation and deployment.
Main & Sub Distribution Panels (MDP/SDP)
Synchronizing Panels
Automatic Transfer Switch (ATS)
Use
Regulate the distribution of electric power to all connected systems based on load criteria.
Description
Fabricated using circuit breakers and enclosures from Schneider, with circuit breakers going up to 6300 Amps and enclosures being Prisma or Block Set. Other brands of circuit breakers and enclosures can be used as per client requirement. All panel testing is carried out in compliance with procedures of Schneider Electric.
Use
Synchronizes and unifies the operation of several generators in parallel as a cohesive unit.
Description
This product can be fabricated for use with generators having similar or different speeds, voltages (low or medium) and control modules. The synchronizing panels are equipped with the outgoing feeders as per client request, fabricated from the available circuit breakers in the market up to 6300 Amps.
Use
Automatically switch between primary and backup power sources when needed to maintain continuous supply.
Description
This product can work with either:
- Two sources (one out of two) e.g. two generators or one generator and the main grid or between two different grid resources or;
- Three sources (one out of three) e.g. two generators and one grid or one generator and two different grid sources or between one feeder from generator and another feeder from synchronizing panel and the third feeder from the main grid.
All fabricated from the available circuit breakers in the market up to 6300 Amps.
Panels for BTU meters
Panels for Pre-paid kWh meters
Automatic Power Factor Correction Panels (APFC)
Load Banks
SCADA & PLC Panels
Pump control panels
Motor Control Center Panels (MCCP)
Use
Measure the consumption of chilled water for Air conditioning.
Description
Design & fabrication of control panels for BTU meters to measure the consumed chilled water for air conditioning in an area, by measuring the flow of the chilled water, delta (T) for chilled water supply and return, and considering the specific heat for the water. The control panel is programmed through the PLC to calculate the chilled water consumption for every tenant and consequently issue monthly bills, which can be paid via an application that also allows users to monitor consumption.
Use
Control electrical consumption and thus electrical bills/budgets.
Description
Design and fabrication of panels containing Pre-paid kWh meters that enable control of electrical consumption and metering, with applications that enable the user to monitor consumption, pay bills and charge the pre-paid meter based on requirement or budget.
Use
Improve the power factor in electrical systems to boost efficiency and reduce consumption.
Description
The APFC panels work to reduce load fluctuations and minimize the effects of reactive power, thus reducing energy bills. These panels include capacitors to store the power, are connected directly with the main distribution panels and are suitable for the buildings, malls and factories which have low power factors such as steel, cement and paper factories etc. APFC can be connected to BMS and can be powered by AI.
Use
Testing power sources (e.g. generators) by applying load conditions.
Description
Design and fabrication of load banks to work manually or automatically through PLC which enables retrieval of data for all parameters such as load (kW/kVA, kVAR), voltage, Amps, power factors, speed etc. The load banks can be utilized to measure the loads and test the following equipment:
- Load test for the generators up to 3000 kW, 400V.
- Load test for the UBS
- Load test for the central battery systems.
Use
Purpose of SCADA is to sense, monitor and coordinate. Purpose of PLC is to command and control.
Description
These panels monitor and control the operation of all systems inside buildings inc. commercial centers and power plants, chiller plants, central AC plants etc. They are programmed according to the philosophy of operation of each system while providing in-depth data for all connected sub-systems using an array of sensors and human-machine interfaces/terminals. These products are provided with a schedule for routine maintenance for all systems through these panels, some using artificial intelligence (AI).
Fabricated using first class components supplied by Schneider, Siemens, ABB or an approved equivalent.
Use
Provides centralized control and protection for all connected pumps.
Description
Used to control the operation of all pumps within the system and is programmed according to the philosophy of operation of each system while providing complete logs for each pump.
Fabricated using first class components supplied by Schneider, Siemens, ABB or an approved equivalent.
Use
Provide centralized control and protection for all electric motors within connected systems.
Description
Used to control the operation of all motors for buildings inc. commercial centers and power plants, chiller plants, central AC plants etc. The MCCP is programmed according to the philosophy of operation of each system and provides complete logs for each motor controlled by this panel.
Fabricated using first class components supplied by Schneider, Siemens, ABB or an approved equivalent.
Generators Category
Generators
Use
Used to generate electricity by burning diesel fuel and gas or biofuel if required.
Description
Assembly of diesel generator sets consisting of core components which are the diesel engine, alternator and controller according to standard specifications, with rated capacities ranging between 20kVA to 1650kVA (50Hz) and low voltage output at 400/231V, enabling the product to be deployed and commissioned swiftly. Standard issue includes both open type or closed type (inside a steel enclosure with the necessary auxiliary systems), with the listed core components provided by Baudouin engines, Faraday and Deep Sea Electronics for control modules (DSE).
Transport Trucks
Trailers
Tankers
